RAM Humidifier 5 Litre

Instructions for use

• When in use, always place unit on a flat, level surface
• To fill, remove water tank and turn upside down. Unscrew the cover of the tank and fill with clean, cold water. Screw the cover on to the tank; wipe with dry cloth, and replace the water tank on the base unit.
• Connect to a power supply and turn on the switch on the rear of the machine.
• When the power indicator light glows green, the machine is ready.
• Turn the spray control knob to desired level.
• When the tank runs out of water, the light indicator will glow red. The device will automatically stop creating fog and the unit can be refilled.

Note:

• Always unplug the unit before removing the tank, moving the unit or refilling.
• The unit has a one way, spring loaded valve which is found on the water tank cover. Once the water tank is placed on the base unit, water will begin to fill the cavity in the base unit.
• To detach the water tank from the base unit when there is still water in the tank, lift up the tank quickly to allow the spring loaded valve on the water tank to close.
• Do not fill the water tank with water which exceeds 40°C.
• If room temperature is below 0°C, be sure to empty the tank when not in use.
• Do not put any metals, chemicals or detergents in to the unit as this can cause the product to malfunction.
• Do not place the unit in direct sunlight.
• Do not place unit near other electrical appliances.
• Always ensure unit is unplugged when pouring water out of the base unit cavity.

Safety Tips:

• Always unplug the unit before removing the tank, moving the unit or refilling.
• Keep out of reach of children.

Maintaining and Cleaning

• Unplug before cleaning.
• Do not put in dishwasher.
• Wipe machine dry with cloth.
• When not in use for extended periods, allow the product to dry and store in box to keep clean.